RealRok™ in our worlds
RealRok™ is an ultra-thin, reinforced, natural stone veneer. Our larger stone veneers in 4 x 8 feet are incredibly lightweight and can be installed on any smooth surface. This opens up new, unlimited opportunities to create the ambiance of natural stone on any smooth surface.
We currently have over 35+ different versions. Suitable for all interior and exterior walls. A general contractor can install lightweight yet stable veneers quickly and easily. After RealRok™ is sealed with any natural stone sealer of your choosing, Realrok™ is low maintenance, stain resistant, and easily cleaned with mild soap and warm water. Resistant to scratch, heat, impact, and corrosive chemical agents such as acids, common cleaning solvents.
Saving Natural Resources
RealRok™ is 0.024 inches to maximum 0.12 inches thick, comparing it with granite and other natural stones which carry a thickness of minimum 0.39 inches
Due to this distinct quality of RealRok™ thousands of feet can be produced while conserving natural resources.
RealRok™’s stone veneers are the following decoration product that will be very popular since it is so practical. An incredible benefit to this product is its flexibility allowing you to install it on curved surfaces such as round columns, walls, or anything you can think of.
Eco Friendly
The way we produce our stone is different from the conventional way so we can save the environment. Our ways of production are more efficient when it comes to the environment.
Minimizing space.
Less particles go into the environment. Less waste in general.
Increase thermal energy efficiency
RealRok™ is only limited to your imagination.
-
• INDOOR WALLS & EXTERIOR FACADES
• COUNTER TOPS
•INDOOR AND OUTDOOR FLOORING
•BATHROOMS
•INDOOR & OUTDOOR COLUMNS
•INDOOR & OUTDOOR KITCHENS
•POOLS
•INDOOR & OUTDOOR FURNITURE
•SHOWERS
•FIREPLACES
•SIGNAGE
•ROOFS FLAT & SHINGLE
•STAIRCASES
•CLADDING
Realrok™ stone used in our projects in the US
Specifics
-
Total weight: approx. 0.3 pounds / SQFT
-
Water absorption with unsealed surface + 2:50%
Abrasion test average removal of 0.02 inches
IS: 9162-1979 Maximum wear of 0.03 inches
(unsealed surface):
Density pounds / square feet IS :12866-1989: 3.1
pounds / square foot
-
Natural stone surface approx. .02 inches
Polyester with fiberglass approx. .004 - 0.04 inches
Total material thickness: 0.024 - 0.12 inches
Formats: 2x4 feet/4x8 feet
Oversize on request
-
Processing temperatures between 50-90° are recommended.
-
RealRok™ can be applied almost anywhere, such as residential and commercial walls, floors, ceilings, showers, cabinets, columns, fireplaces, domes, exterior facades, roofs, and pools. The possibilities for RealRok’s applications are endless.
FAQ’s
-
RealRok™ is as durable as the surface applied.
For example, if it is applied to a concrete floor, you can drive on it.
-
It is certified with an A2 fire rating. Its water absorption is 2.50% with an unsealed surface.
-
The best adhesive is clear contact cement which would be best on plexiglass.
-
A polyurethane or FRP adhesive is durable for interior installations.
-
RealRok™ can be applied almost anywhere, such as residential and commercial walls, floors, ceilings, showers, cabinets, columns, fireplaces, domes, exterior facades, roofs, and pools. The possibilities for RealRok’s applications are endless.
-
Laticrete Latapoxy 300 is the best adhesive for showers and exterior applications
-
RealRok™ requires a natural stone sealer every 5-10 years.
Founder & President
Arbi Rusi
917-232-6485
Director of Business Development and Design Acquisitions
Richard Sepekoff
212-380-8328
Contact us.
-
-
Richmond Terrace, Staten Island, NY 10310